F 430 PP drum pump kit
F 430 PP-40/33
Item no. 10-45840610
EAN: 4260387214247
for the fire brigade to pump foaming agents and low-concentration acids and alkalis out of drums.
Go to product details
- Weight:
- 8.8 kg
- motor type:
- F 458
- supply voltage:
- 24 V
- material:
- Polypropylene
- for use in haz. area:
- no
- Special feature:
- Made in Germany
- Certificates:
-
Product details
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1000 mm) with mechanical seal, polypropylene outer tube, F 458 commutator motor, hose line, pump nozzle and compression gland. The pump can be disassembled into two parts without any tools. The inner tube with steel core prevents the length from changing as the temperature fluctuates.
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
| Feature | Value |
|---|---|
| Gewicht | 8.8 kg |
| for use in haz. area | no |
| max. flow rate | 40 l/min |
| immersion length | 1000 mm |
| max. discharge head | 9,5 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Polypropylene |
| material shaft | Hastelloy C |
| mechanical seal | PTFE/carbon, oxide ceramics, HC, FKM |
| viscosity max. | 1000 mPas |
| cooling | external ventilated |
| rated output | 0,41 kW |
| protection class | IP 55 |
| speed control | no |
| supply voltage | 24 V |
| motor type | F 458 |
| type drum pump | F 430 |
| cable length | 5,00 m |
| type plug | without |
| undervoltage prot. | no |
| Ø outlet spout | 25 mm |
| outer diameter | 27,00 mm |
| hose length from | 2,0 m |
| nominal diameter | DN 19 mm |
| certificates | certificates |
| type hose line | pvc hose |
| material seal | FKM |
| material | polypropylene |
| Hand nozzles | technical data |
| Inliner | no |
| material inside | PVC with a wire coil |
| swivelling | yes |
| base part | 40 mm |
| shaft bearing | slide bearing - not in contact with the medium |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Battery acid, 40%, 20-40 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Lead acetate, 10%, 20-40 °C
- Bleaching solution, 10%, 20 °C
- Bleaching solution, 12%, 5%,20 °C
- Bleaching solution, 20%, 20 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hypochlorite, 10%, 20 °C
- Calcium nitrate, 50%, 20-40 °C
- Chlorine bleaching, 10%, 20 °C
- Chlorine bleaching, 12%, 5%,20 °C
- Chlorine bleaching, 20%, 20 °C
- Chloric acid, 10%, 20 °C
- Hydrocyanic acid, 100%, 20 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) chloride, 50%, 20 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Fluorosilicic acid, 32%, 20 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycerine, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Potassium chloride, 10%, 20-40 °C
- Potassium chloride, 100%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Lime milk, 15%, 20 °C
- Silicic acid, 100%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Copper sulphate, 18%, 20 °C
- Linseed oil, 100%, 20 °C
- Magnesium chloride, 10%, 20-40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Salt water, 100%, 20 °C
- Milk, 100%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral water, 100%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Sodium chloride, 20%, 20 °C
- Sodium fluoride, 4%, 20 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hypochlorite, 10%, 20 °C
- Sodium hypochlorite, 12%, 5%,20 °C
- Sodium hypochlorite, 20%, 20 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrite, 50%, 20 °C
- Bleach, 10%, 20 °C
- Bleach, 12%, 5%,20 °C
- Bleach, 20%, 20 °C
- Caustic soda, 10%, 20 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Phosphoric acid, 30%, 20-40 °C
- Phosphoric acid, 50%, 20-40 °C
- Propylene glycol, 100%, 20 °C
- Nitric acid, 10%, 20 °C
- Hydrochloric acid, 10%, 20 °C
- Hydrochloric acid, 30%, 20 °C
- Sulphuric acid, 40%, 20-40 °C
- Silicone oil, 100%, 20 °C
- Cooking oil, 100%, 20 °C
- Ink, 100%, 20 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Hydrogen peroxide, 3%, 20 °C
- Hydrogen peroxide, 10%, 20 °C
- Hydrogen peroxide, 20%, 20 °C
- Zinc chloride, 20%, 20 °C
- Tin (II) chloride, 20%, 20 °C
- Citric acid, 50%, 20 °C
- Citric acid, 50%, 40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.