F 426 S drum pump
F 426 S-41/38 | FKM
Item no. 10-42620010
for mixing and/or pumping out of drums. Made from stainless steel, FKM seal.
Go to product details
- Weight:
- 3.79 kg
- for use in haz. area:
- yes
- FOOD approval:
- no
- material:
- Stainless steel
- Special feature:
- Made in Germany
Product details
The F 426 drum pump (with mechanical seal to cover inner tube; immersion length 1000 mm) is ideal for mixing and/or pumping inhomogeneous media. Media, which are prone to rapid separation, can therefore be kept in motion even during the pumping process. If the outlet is closed, e.g. by a pump nozzle, the F 426 drum pump can also be temporarily run as a pure mixing pump. The transition between "Mix" and "Pump" is performed very easily by turning an adjusting lever. There are two adjusting levers for opening and closing the mixing apertures with ease. The mixing apertures allow the medium to flow back into the container for mixing. The drum pump is easy to disassemble for cleaning. The drum pump is made from stainless steel and can also be used in areas subject to explosion hazards for liquids with an electrical conductivity of more than 10,000 pS/m.
If necessary, the pump assembly can also be combined with different motors.
- 3 operating modes in one pump: - Pump- Pump and mix at the same time- Pure mixing (temporarily)
- The operating mode can be changed during operation
- Easy to dismantle for cleaning
- Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
- Stainless steel version also for use in areas subject to explosion hazards
| Feature | Value |
|---|---|
| Gewicht | 3.79 kg |
| 3A version | no |
| connection outlet | External thread G 1 1/4" |
| Outer diameter | 41,00 mm |
| Ex-marking | Ex II 1/2 G Ex h IIB T4 Ga/Gb |
| for use in haz. area | yes |
| FDA approval | no |
| max. flow rate | 240 l/min |
| FOOD approval | no |
| immersion length | 1000 mm |
| max. discharge head | 13 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Stainless steel |
| material shaft | stainless steel |
| mechanical seal | PTFE/carbon, oxide ceramics, S, FKM |
| type impeller | axial impeller 38 for higher delivery rate |
| viscosity max. | 900 mPas |
| type drum pump | F 426 |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Formic acid, 50%, 20 °C
- Formic acid, 50%, 40 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Ammonium sulphate, 10%, 40 °C
- Amyl alcohol, 100%, 20 °C
- Amyl alcohol, 100%, 40 °C
- Arsenic acid, 10%, 20-40 °C
- Arsenic acid, 80%, 20-40 °C
- Benzaldehyde, 100%, 20 °C
- Benzaldehyde, 100%, 40 °C
- Benzine, 100%, 20 °C
- Benzine, 100%, 40 °C
- Benzole, 100%, 20 °C
- Benzoic aldehyde, 30%, 20 °C
- Lead acetate, 10%, 20-40 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Butanol, 100%, 20 °C
- Butyric acid, 20%, 20 °C
- Butyl alcohol, 100%, 20 °C
- Butylene glycol, 10%, 20-40 °C
- Butylene glycol, 100%, 20 °C
- Butylene glycol, 100%, 40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hydroxide, 15%, 40 °C
- Calcium nitrate, 50%, 20-40 °C
- Hydrocyanic acid, 100%, 20 °C
- Diesel, 100%, 20 °C
- Diesel, 100%, 40 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethanol, 100%, 20 °C
- Essential oils, 100%, 20 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Ethyl glycol, 100%, 20-40 °C
- Fatty acids, 100%, 20-40 °C
- Formaldehyde, 10%, 20 °C
- Formaldehyde, 10%, 40 °C
- Formaldehyde, 35%, 20 °C
- Formaldehyde, 40%, 20 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycerine, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Glycolic acid, 37%, 20 °C
- Glycolic acid, 70%, 20 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Urea, 33%, 40 °C
- Heating oil, 100%, 20 °C
- Heating oil, 100%, 40 °C
- Hexanol, 100%, 20 °C
- Hydrazine, 100%, 20 °C
- Isobutyl alcohol, 100%, 20-40 °C
- Isocyanate, 100%, 20 °C
- Isopropanol, 100%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Potassium permanganate, 6%, 20-40 °C
- Potassium permanganate, 18%, 20-40 °C
- Lime milk, 15%, 20 °C
- Lime milk, 15%, 40 °C
- Silicic acid, 100%, 20-40 °C
- Copper nitrate, 25%, 20 °C
- Copper nitrate, 25%, 40 °C
- Copper sulphate, 18%, 20 °C
- Copper sulphate, 18%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Methyl glycol, 100%, 20-40 °C
- Milk, 100%, 20 °C
- Lactic acid, 10%, 20-40 °C
- Lactic acid, 90%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium fluoride, 4%, 20 °C
- Sodium fluoride, 4%, 40 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hydroxide, 10%, 40 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Sodium nitrite, 50%, 40 °C
- Caustic soda, 10%, 20 °C
- Caustic soda, 10%, 40 °C
- Octanoic acid, 100%, 20 °C
- Octanoic acid, 100%, 40 °C
- Oleic acid, 100%, 20 °C
- Oxalic acid, 10%, 20 °C
- Oxalic acid, 10%, 40 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Perchloric acid, 20%, 20-40 °C
- Perchloric acid, 50%, 20-40 °C
- Perchloric acid, 70%, 20-40 °C
- Perchloric acid, 100%, 20 °C
- Perchloric acid, 100%, 40 °C
- Peracetic acid, 30%, 20 °C
- Petroleum, 100%, 20 °C
- Petroleum, 100%, 40 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phosphoric acid, 30%, 20-40 °C
- Phosphoric acid, 50%, 20-40 °C
- Phosphoric acid, 85%, 20-40 °C
- Polyol, 100%, 20 °C
- Propanol, 100%, 20-40 °C
- Propionic acid, 50%, 20-40 °C
- Propionic acid, 100%, 20-40 °C
- Propylene glycol, 100%, 20 °C
- Propylene glycol, 100%, 40 °C
- Castor oil, 100%, 20-40 °C
- Nitric acid, 10%, 20 °C
- Nitric acid, 10%, 40 °C
- Nitric acid, 30%, 40 °C
- Nitric acid, 50%, 20 °C
- Carbon disulphide, 100%, 20 °C
- Carbon disulphide, 100%, 40 °C
- Sulphuric acid, 90%, 20 °C
- Sulphuric acid, 98%, 20 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Turpentine oil, 100%, 20 °C
- Turpentine oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Transformer oil, 100%, 20 °C
- Transformer oil, 100%, 40 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Urine, 100%, 40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Hydrogen peroxide, 3%, 20 °C
- Hydrogen peroxide, 10%, 20 °C
- Hydrogen peroxide, 20%, 20 °C
- Hydrogen peroxide, 30%, 20 °C
- Hydrogen peroxide, 90%, 20 °C
- Tartaric acid, 100%, 20-40 °C
- Xylene, 100%, 20 °C
- Zinc chloride, 20%, 20 °C
- Zinc chloride, 20%, 40 °C
- Citric acid, 50%, 20 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.