F 430 S drum pump kit
F 430 S-41/38 | FKM
Item no. 10-41620010
EAN: 4260387213288
for pumping a huge range of media out of drums, with compressed air motor.
Go to product details
- Weight:
- 8.2 kg
- motor type:
- F 416 Ex
- material:
- Stainless steel
- for use in haz. area:
- yes
- Special feature:
- Made in Germany
Product details
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1000 mm) with mechanical seal outer tube, stainless steel outer tube, hose line, pump nozzle and compression gland. The drum pump is driven by the F 416 compressed air motor. The pump can be disassembled into two parts without any tools.
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
| Feature | Value |
|---|---|
| Gewicht | 8.2 kg |
| Ex-marking | Ex II 2G Ex h IIC T6 Gb |
| for use in haz. area | yes |
| max. flow rate | 50 l/min |
| immersion length | 1000 mm |
| max. discharge head | 13 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Stainless steel |
| material shaft | stainless steel |
| mechanical seal | PTFE/carbon, oxide ceramics, HC, FKM |
| viscosity max. | 800 mPas |
| rated output | 0,47 kW |
| speed control | via supply air |
| motor type | F 416 Ex |
| type drum pump | F 430 |
| Ø outlet spout | 28 mm |
| outer diameter | 31 mm |
| hose length from | 2,0 m |
| nominal diameter | DN 21 mm |
| certificates | certificates |
| type hose line | universal hose |
| material seal | FEP/PTFE |
| material | stainless steel |
| Hand nozzles | technical data |
| Inliner | yes |
| material inside | Fluoropolymer THV seamless |
| swivelling | yes |
| base part | 41 mm |
| shaft bearing | slide bearing - not in contact with the medium |
| Ex-marking | Ex II 1/2 G Ex h IIB T4 Ga/Gb |
| air consumption | 14 l/s |
| operating pressure | 6 bar |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Ammonium sulphate, 10%, 40 °C
- Amyl alcohol, 100%, 20 °C
- Arsenic acid, 10%, 20-40 °C
- Arsenic acid, 80%, 20-40 °C
- Benzine, 100%, 20 °C
- Benzine, 100%, 40 °C
- Lead acetate, 10%, 20-40 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Butanol, 100%, 20 °C
- Butyl alcohol, 100%, 20 °C
- Butylene glycol, 10%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hydroxide, 15%, 40 °C
- Calcium nitrate, 50%, 20-40 °C
- Diesel, 100%, 20 °C
- Diesel, 100%, 40 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethanol, 100%, 20 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Ethyl glycol, 100%, 20-40 °C
- Formaldehyde, 10%, 20 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Glycolic acid, 37%, 20 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Urea, 33%, 40 °C
- Heating oil, 100%, 20 °C
- Heating oil, 100%, 40 °C
- Hydrazine, 100%, 20 °C
- Isocyanate, 100%, 20 °C
- Isopropanol, 100%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Lime milk, 15%, 20 °C
- Lime milk, 15%, 40 °C
- Copper nitrate, 25%, 20 °C
- Copper nitrate, 25%, 40 °C
- Copper sulphate, 18%, 20 °C
- Copper sulphate, 18%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Methyl glycol, 100%, 20-40 °C
- Milk, 100%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium fluoride, 4%, 20 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hydroxide, 10%, 40 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Caustic soda, 10%, 20 °C
- Caustic soda, 10%, 40 °C
- Oxalic acid, 10%, 20 °C
- Oxalic acid, 10%, 40 °C
- Paraffin oil, 100%, 20 °C
- Petroleum, 100%, 20 °C
- Petroleum, 100%, 40 °C
- Phenol, 100%, 20 °C
- Phenol, 90%, 20 °C
- Polyol, 100%, 20 °C
- Propanol, 100%, 20-40 °C
- Propylene glycol, 100%, 20 °C
- Castor oil, 100%, 20-40 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Turpentine oil, 100%, 20 °C
- Turpentine oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Transformer oil, 100%, 20 °C
- Transformer oil, 100%, 40 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Urine, 100%, 40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Tartaric acid, 100%, 20-40 °C
- Zinc chloride, 20%, 20 °C
- Zinc chloride, 20%, 40 °C
- Citric acid, 50%, 20 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.