FP 424 Ex S drum pump kit
FP 424 Ex S-43/38 | FKM
Item no. 10-46024112
EAN: 4260387213332
for pumping highly flammable media out of IBCs, motor with speed setting
Go to product details
- Weight:
- 12 kg
- motor type:
- F 460 Ex EL
- supply voltage:
- 230-240 V
- material:
- Stainless steel
- for use in haz. area:
- yes
- Special feature:
- Made in Germany
- Certificates:
-
Product details
Fully-prepared pump kit for pumping highly flammable media out of IBCs (1200 mm immersion length). Comprising F 424 drum pump (no seals near the media), stainless steel outer tube, hose line, pump nozzle and compression gland. It is driven by the F 460 Ex EL commutator motor with speed setting. The pump has explosion protection and is non-wearing. Openings ensure that the liquid level inside the pump is the same as that in the drum.
- No wear to seals and bearings
- Medium is not contaminated by abrasive wear from sealants or lubricants
- Low maintenance and durable
- For use in areas subject to explosion hazards
| Feature | Value |
|---|---|
| Gewicht | 12 kg |
| Ex-marking | II 2G Ex db eb IIC T6 Gb |
| for use in haz. area | yes |
| max. flow rate | 50 l/min |
| immersion length | 1200 mm |
| max. discharge head | 9,5 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Stainless steel |
| material shaft | stainless steel |
| mechanical seal | without |
| viscosity max. | 600 mPas |
| cooling | external ventilated |
| rated output | 0,46 kW |
| protection class | IP 55 |
| speed control | yes |
| supply voltage | 230-240 V |
| motor type | F 460 Ex EL |
| type drum pump | FP 424 |
| cable length | 5,00 m |
| frequency | 50-60 Hz |
| type plug | CEE 7/7-plug |
| undervoltage prot. | yes |
| Ø outlet spout | 25 mm |
| outer diameter | 31 mm |
| hose length from | 2,0 m |
| nominal diameter | DN 21 mm |
| certificates | certificates |
| type hose line | universal hose |
| material seal | PTFE |
| material | brass nickel plated |
| Hand nozzles | technical data |
| Inliner | yes |
| material inside | Fluoropolymer THV seamless |
| swivelling | yes |
| base part | 43 mm |
| shaft bearing | guide bearing PTFE with fibreglass and graphite |
| Ex-marking | Ex II 1/2 G Ex h IIB T4…T3 Ga/Gb |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Acetone, 10%, 20 °C
- Acetone, 10%, 40 °C
- Acetone, 100%, 20 °C
- Acetone, 100%, 40 °C
- Amyl acetate, 100%, 20 °C
- Amyl alcohol, 100%, 20 °C
- Benzine, 100%, 20 °C
- Butyl acetate, 100%, 20 °C
- Butylene glycol, 10%, 20-40 °C
- Butylene glycol, 100%, 20 °C
- Calcium hydroxide, 15%, 20 °C
- Diesel, 100%, 20 °C
- Dimethylformamide (DMF), 100%, 20 °C
- Ethanol, 100%, 20 °C
- Ethylene glycol, 100%, 20 °C
- Ethyl glycol, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Heating oil, 100%, 20 °C
- Isobutyl alcohol, 100%, 20-40 °C
- Isopropanol, 100%, 20-40 °C
- Isopropyl acetate, 100%, 20 °C
- Lime milk, 15%, 20 °C
- Linseed oil, 100%, 20 °C
- Methyl glycol, 100%, 20-40 °C
- Mineral oils, 100%, 20 °C
- Bicarbonate of soda, 10%, 20 °C
- Sodium nitrate, 45%, 20 °C
- Nitrotoluene, 100%, 20 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Petroleum, 100%, 20 °C
- Phenol, 100%, 20 °C
- Phenol, 50%, 20 °C
- Propanol, 100%, 20-40 °C
- Propylene glycol, 100%, 20 °C
- Castor oil, 100%, 20-40 °C
- Silicone oil, 100%, 20 °C
- Toluene, 100%, 20-40 °C
- Glucose solution, 100%, 20-40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.