F 430 PP container pump
F 430 PP-100/50 | FKM
Item no. 10-43040512
with mechanical seal for pumping out of IBCs. Made from polypropylene, with impeller.
Go to product details
- Weight:
- 2.2 kg
- for use in haz. area:
- no
- FOOD approval:
- no
- material:
- Polypropylene
- Special feature:
- Made in Germany
Product details
The F 430 polypropylene container pump with mechanical seal to cover the inner tube (here immersion length 1200 mm) was developed especially for greater delivery heads/pressures. Instead of a rotor, it is equipped with an impeller in a pump housing. Coupled with powerful FLUX motors, in the flow rate range up to 40 l/min, it delivers significantly higher pressure of up to more than 3 bar compared with drum pumps with semi-axial rotors. It is therefore particularly well suited to pumping media, such as acids and alkalis as well as virtually all low-viscosity, neutral liquids, out of IBCs and other containers into pipework systems at a higher level or from IBC stores in the cellar to higher floors. The inner tube is reinforced with a metal core. When using in an IBC, we would recommend the IBC cover with screw connection.
- Delivers a significantly higher delivery head in the range up to 40 l/min compared with pumps with a semi-axial rotor (Z rotor)
- Allows media to be pumped out of IBC stores in the cellar to higher floors
- Ideal for pumping media into a pipework system at a higher level
- Can be used as a supply pump for distribution networks, e.g. to supply process water
- The inner tube reinforced with a metal core is unique. It allows the mechanical seal to function to its full ability across all operating temperature ranges, thereby preventing leaks and unnecessary wear
| Feature | Value |
|---|---|
| Gewicht | 2.2 kg |
| 3A version | no |
| connection outlet | External thread G 1 1/4" |
| Outer diameter | 50,00 mm |
| Ex-marking | without |
| for use in haz. area | no |
| FDA approval | no |
| max. flow rate | 110 l/min |
| FOOD approval | no |
| immersion length | 1200 mm |
| max. discharge head | 32,0 mWs |
| material impeller | Polypropylene |
| material seal | FKM |
| material | Polypropylene |
| material shaft | Hastelloy C |
| mechanical seal | PTFE/carbon, oxide ceramics, HC, FKM |
| type impeller | axial impeller 38 for higher delivery rate |
| viscosity max. | 150 mPas |
| type drum pump | F 430 |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Battery acid, 40%, 20-40 °C
- Formic acid, 50%, 20 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Ammonium sulphate, 10%, 40 °C
- Arsenic acid, 10%, 20-40 °C
- Arsenic acid, 80%, 20-40 °C
- Lead acetate, 10%, 20-40 °C
- Bleaching solution, 10%, 20 °C
- Bleaching solution, 12%, 5%,20 °C
- Bleaching solution, 20%, 20 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Bromic acid, 10%, 20-40 °C
- Hydrobromic acid, 10%, 20-40 °C
- Hydrobromic acid, 48%, 20-40 °C
- Butylene glycol, 10%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hydroxide, 15%, 40 °C
- Calcium hypochlorite, 10%, 20 °C
- Calcium hypochlorite, 10%, 40 °C
- Calcium nitrate, 50%, 20-40 °C
- Chlorine bleaching, 10%, 20 °C
- Chlorine bleaching, 12%, 5%,20 °C
- Chlorine bleaching, 20%, 20 °C
- Chloroacetic acid, 85%, 20 °C
- Chloroacetic acid, 85%, 40 °C
- Chloroacetic acid, 98%, 20 °C
- Chloroacetic acid, 98%, 40 °C
- Chloric acid, 10%, 20 °C
- Chloric acid, 10%, 40 °C
- Hydrocyanic acid, 100%, 20 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 10%, 40 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) chloride, 50%, 40 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) chloride, 50%, 20 °C
- Iron (III) chloride, 50%, 40 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Fluorosilicic acid, 32%, 20 °C
- Fluorosilicic acid, 32%, 40 °C
- Fluorhydric acid, 40%, 20 °C
- Fluorhydric acid, 40%, 40 °C
- Fluorhydric acid, 60%, 20 °C
- Hydrofluoric acid, 40%, 20 °C
- Hydrofluoric acid, 40%, 40 °C
- Hydrofluoric acid, 60%, 20 °C
- Formaldehyde, 10%, 20 °C
- Formaldehyde, 10%, 40 °C
- Formaldehyde, 35%, 20 °C
- Formaldehyde, 40%, 20 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycerine, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Glycolic acid, 37%, 20 °C
- Glycolic acid, 70%, 20 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Urea, 33%, 40 °C
- Heating oil, 100%, 20 °C
- Hexanol, 100%, 20 °C
- Tincture of iodine, 100%, 20-40 °C
- Hydriodic acid, 100%, 20 °C
- Hydriodic acid, 100%, 40 °C
- Potassium chloride, 10%, 20-40 °C
- Potassium chloride, 100%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Potassium permanganate, 6%, 20-40 °C
- Potassium permanganate, 18%, 20-40 °C
- Lime milk, 15%, 20 °C
- Lime milk, 15%, 40 °C
- Silicic acid, 100%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Copper (I) chloride, 10%, 20-40 °C
- Copper (II) chloride, 20%, 20-40 °C
- Copper sulphate, 18%, 20 °C
- Copper sulphate, 18%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium chloride, 10%, 20-40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Salt water, 100%, 20 °C
- Salt water, 100%, 40 °C
- Milk, 100%, 20 °C
- Lactic acid, 10%, 20-40 °C
- Lactic acid, 90%, 20 °C
- Lactic acid, 90%, 40 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Sodium chlorite, 5%, 20 °C
- Sodium chlorite, 5%, 40 °C
- Sodium fluoride, 4%, 20 °C
- Sodium fluoride, 4%, 40 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hydroxide, 10%, 40 °C
- Sodium hypochlorite, 10%, 20 °C
- Sodium hypochlorite, 12%, 5%,20 °C
- Sodium hypochlorite, 20%, 20 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Sodium nitrite, 50%, 40 °C
- Bleach, 10%, 20 °C
- Bleach, 12%, 5%,20 °C
- Bleach, 20%, 20 °C
- Caustic soda, 10%, 20 °C
- Caustic soda, 10%, 40 °C
- Octanoic acid, 100%, 20 °C
- Oleic acid, 100%, 20 °C
- Oxalic acid, 10%, 20 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Perchloric acid, 20%, 20-40 °C
- Perchloric acid, 50%, 20-40 °C
- Perchloric acid, 70%, 20-40 °C
- Perchloric acid, 100%, 20 °C
- Peracetic acid, 30%, 20 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phosphoric acid, 30%, 20-40 °C
- Phosphoric acid, 50%, 20-40 °C
- Phosphoric acid, 85%, 20-40 °C
- Phosphoric acid, 95%, 20 °C
- Propylene glycol, 100%, 20 °C
- Propylene glycol, 100%, 40 °C
- Castor oil, 100%, 20-40 °C
- Nitric acid, 10%, 20 °C
- Hydrochloric acid, 10%, 20 °C
- Hydrochloric acid, 10%, 40 °C
- Hydrochloric acid, 30%, 20 °C
- Hydrochloric acid, 30%, 40 °C
- Hydrochloric acid, 100%, 20 °C
- Hydrochloric acid, 100%, 40 °C
- Sulphuric acid, 40%, 20-40 °C
- Sulphuric acid, 80%, 20 °C
- Sulphuric acid, 80%, 40 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Urine, 100%, 40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Hydrogen peroxide, 3%, 20 °C
- Hydrogen peroxide, 10%, 20 °C
- Hydrogen peroxide, 20%, 20 °C
- Hydrogen peroxide, 30%, 20 °C
- Tartaric acid, 100%, 20-40 °C
- Zinc chloride, 20%, 20 °C
- Zinc chloride, 20%, 40 °C
- Tin (II) chloride, 20%, 20 °C
- Tin (II) chloride, 20%, 40 °C
- Citric acid, 50%, 20 °C
- Citric acid, 50%, 40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.