F 430 AL drum pump
F 430 AL-41/37 Z | NBR
Item no. 10-43010412
with mechanical seal, for pumping out of IBCs. Made from aluminium, NBR seal, semi-axial rotor.
Go to product details
- Weight:
- 1.682 kg
- for use in haz. area:
- no
- FOOD approval:
- no
- material:
- Aluminium
- Special feature:
- Made in Germany
Product details
Thanks to the semi-axial rotor (Z version), the pump is particularly well suited to heavier media (density as of 1.3 kg/dm³), with long pressure lines and greater differences in height. The F 430 drum pump can be used universally for a huge range of different media and is suited to pumping out of IBCs (immersion length 1200 mm). The design featuring a mechanical seal to cover the inner tube means that the drum pump can be quickly and easily dismantled into its two main components. This makes good cleaning possible. It is ideal for tasks where the medium is changed frequently and when working with media that cures, dries quickly or crystallises. The outer material is aluminium. If necessary, it can be combined with different motors.
- Ideal for tasks where the medium is changed frequently and when working with media that cures, dries quickly or crystallises
- Can be quickly and easily dismantled into its two main components for cleaning
- Improved service life when working with abrasive media compared with a sealless pump
- Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
- Quiet operation with particularly low levels of vibration
| Feature | Value |
|---|---|
| Gewicht | 1.682 kg |
| 3A version | no |
| connection outlet | External thread G 1 1/4" |
| Outer diameter | 41,00 mm |
| Ex-marking | without |
| for use in haz. area | no |
| FDA approval | no |
| max. flow rate | 240 l/min |
| FOOD approval | no |
| immersion length | 1200 mm |
| max. discharge head | 30,0 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | NBR |
| material | Aluminium |
| material shaft | stainless steel |
| mechanical seal | PTFE/carbon, oxide ceramics, S, NBR |
| type impeller | semi-axial impeller 37Z for higher delivery head |
| viscosity max. | 1200 mPas |
| type drum pump | F 430 |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Ammonia solution, 100%, 20 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Boric acid, 10%, 20-40 °C
- Butylene glycol, 10%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium nitrate, 50%, 20-40 °C
- Diesel, 100%, 20 °C
- Diesel, 100%, 40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Formamide, 100%, 20 °C
- Glucose, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Heating oil, 100%, 20 °C
- Heating oil, 100%, 40 °C
- Isocyanate, 100%, 20 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Copper nitrate, 25%, 20 °C
- Copper nitrate, 25%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Milk, 100%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Paraffin oil, 100%, 20 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phenol, 90%, 40 °C
- Polyol, 100%, 20 °C
- Propylene glycol, 100%, 20 °C
- Castor oil, 100%, 20-40 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Turpentine oil, 100%, 20 °C
- Turpentine oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Transformer oil, 100%, 20 °C
- Transformer oil, 100%, 40 °C
- Glucose solution, 100%, 20-40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.