F 426 PP drum pump
F 426 PP-50/33 | FKM
Item no. 10-42640002
for mixing and/or pumping out of IBCs. Made from polypropylene, FKM seal.
Go to product details
- Weight:
- 2.1 kg
- for use in haz. area:
- no
- FOOD approval:
- no
- material:
- Polypropylene
- Special feature:
- Made in Germany
Product details
The F 426 drum pump (with mechanical seal to cover inner tube, immersion length 1200 mm) is ideal for mixing and/or pumping inhomogeneous media. Media, which are prone to rapid separation, can therefore be kept in motion even during the pumping process. If the outlet is closed, e.g. by a pump nozzle, the F 426 drum pump can also be temporarily run as a pure mixing pump. The transition between "Mix" and "Pump" is performed very easily by turning an adjusting lever. There are two adjusting levers for opening and closing the mixing apertures with ease. The mixing apertures allow the medium to flow back into the container for mixing. The drum pump is easy to disassemble for cleaning. The drum pump is made from polypropylene. In the PP version, the inner tube reinforced with metal core prevents leaks and unnecessary wear to the mechanical seal across all operating temperature ranges.
If necessary, the pump assembly can also be combined with different motors.
- 3 operating modes in one pump: - Pump- Pump and mix at the same time- Pure mixing (temporarily)
- The operating mode can be changed during operation
- Easy to dismantle for cleaning
- In the PP version, the inner tube reinforced with metal core prevents leaks and unnecessary wear to the mechanical seal across all operating temperature ranges.
- Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
| Feature | Value |
|---|---|
| Gewicht | 2.1 kg |
| 3A version | no |
| connection outlet | External thread G 1 1/4" |
| Outer diameter | 50,00 mm |
| Ex-marking | without |
| for use in haz. area | no |
| FDA approval | no |
| max. flow rate | 240 l/min |
| FOOD approval | no |
| immersion length | 1200 mm |
| max. discharge head | 13 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Polypropylene |
| material shaft | Hastelloy C |
| mechanical seal | PTFE/carbon, oxide ceramics, HC, FKM |
| type impeller | axial impeller 33 for higher delivery rate |
| viscosity max. | 1200 mPas |
| type drum pump | F 426 |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Battery acid, 40%, 20-40 °C
- Formic acid, 50%, 20 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Ammonium sulphate, 10%, 40 °C
- Arsenic acid, 10%, 20-40 °C
- Arsenic acid, 80%, 20-40 °C
- Lead acetate, 10%, 20-40 °C
- Bleaching solution, 10%, 20 °C
- Bleaching solution, 12%, 5%,20 °C
- Bleaching solution, 20%, 20 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Bromic acid, 10%, 20-40 °C
- Hydrobromic acid, 10%, 20-40 °C
- Hydrobromic acid, 48%, 20-40 °C
- Butylene glycol, 10%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hydroxide, 15%, 40 °C
- Calcium hypochlorite, 10%, 20 °C
- Calcium hypochlorite, 10%, 40 °C
- Calcium nitrate, 50%, 20-40 °C
- Chlorine bleaching, 10%, 20 °C
- Chlorine bleaching, 12%, 5%,20 °C
- Chlorine bleaching, 20%, 20 °C
- Chloroacetic acid, 85%, 20 °C
- Chloroacetic acid, 85%, 40 °C
- Chloroacetic acid, 98%, 20 °C
- Chloroacetic acid, 98%, 40 °C
- Chloric acid, 10%, 20 °C
- Chloric acid, 10%, 40 °C
- Hydrocyanic acid, 100%, 20 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 10%, 40 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) chloride, 50%, 40 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) chloride, 50%, 20 °C
- Iron (III) chloride, 50%, 40 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Fluorosilicic acid, 32%, 20 °C
- Fluorosilicic acid, 32%, 40 °C
- Fluorhydric acid, 40%, 20 °C
- Fluorhydric acid, 40%, 40 °C
- Fluorhydric acid, 60%, 20 °C
- Hydrofluoric acid, 40%, 20 °C
- Hydrofluoric acid, 40%, 40 °C
- Hydrofluoric acid, 60%, 20 °C
- Formaldehyde, 10%, 20 °C
- Formaldehyde, 10%, 40 °C
- Formaldehyde, 35%, 20 °C
- Formaldehyde, 40%, 20 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycerine, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Glycolic acid, 37%, 20 °C
- Glycolic acid, 70%, 20 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Urea, 33%, 40 °C
- Heating oil, 100%, 20 °C
- Hexanol, 100%, 20 °C
- Tincture of iodine, 100%, 20-40 °C
- Hydriodic acid, 100%, 20 °C
- Hydriodic acid, 100%, 40 °C
- Potassium chloride, 10%, 20-40 °C
- Potassium chloride, 100%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Potassium permanganate, 6%, 20-40 °C
- Potassium permanganate, 18%, 20-40 °C
- Lime milk, 15%, 20 °C
- Lime milk, 15%, 40 °C
- Silicic acid, 100%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Copper (I) chloride, 10%, 20-40 °C
- Copper (II) chloride, 20%, 20-40 °C
- Copper sulphate, 18%, 20 °C
- Copper sulphate, 18%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium chloride, 10%, 20-40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Salt water, 100%, 20 °C
- Salt water, 100%, 40 °C
- Milk, 100%, 20 °C
- Lactic acid, 10%, 20-40 °C
- Lactic acid, 90%, 20 °C
- Lactic acid, 90%, 40 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Sodium chlorite, 5%, 20 °C
- Sodium chlorite, 5%, 40 °C
- Sodium fluoride, 4%, 20 °C
- Sodium fluoride, 4%, 40 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hydroxide, 10%, 40 °C
- Sodium hypochlorite, 10%, 20 °C
- Sodium hypochlorite, 12%, 5%,20 °C
- Sodium hypochlorite, 20%, 20 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Sodium nitrite, 50%, 40 °C
- Bleach, 10%, 20 °C
- Bleach, 12%, 5%,20 °C
- Bleach, 20%, 20 °C
- Caustic soda, 10%, 20 °C
- Caustic soda, 10%, 40 °C
- Octanoic acid, 100%, 20 °C
- Oleic acid, 100%, 20 °C
- Oxalic acid, 10%, 20 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Perchloric acid, 20%, 20-40 °C
- Perchloric acid, 50%, 20-40 °C
- Perchloric acid, 70%, 20-40 °C
- Perchloric acid, 100%, 20 °C
- Peracetic acid, 30%, 20 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phosphoric acid, 30%, 20-40 °C
- Phosphoric acid, 50%, 20-40 °C
- Phosphoric acid, 85%, 20-40 °C
- Phosphoric acid, 95%, 20 °C
- Propylene glycol, 100%, 20 °C
- Propylene glycol, 100%, 40 °C
- Castor oil, 100%, 20-40 °C
- Nitric acid, 10%, 20 °C
- Hydrochloric acid, 10%, 20 °C
- Hydrochloric acid, 10%, 40 °C
- Hydrochloric acid, 30%, 20 °C
- Hydrochloric acid, 30%, 40 °C
- Hydrochloric acid, 100%, 20 °C
- Hydrochloric acid, 100%, 40 °C
- Sulphuric acid, 40%, 20-40 °C
- Sulphuric acid, 80%, 20 °C
- Sulphuric acid, 80%, 40 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Urine, 100%, 40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Hydrogen peroxide, 3%, 20 °C
- Hydrogen peroxide, 10%, 20 °C
- Hydrogen peroxide, 20%, 20 °C
- Hydrogen peroxide, 30%, 20 °C
- Tartaric acid, 100%, 20-40 °C
- Zinc chloride, 20%, 20 °C
- Zinc chloride, 20%, 40 °C
- Tin (II) chloride, 20%, 20 °C
- Tin (II) chloride, 20%, 40 °C
- Citric acid, 50%, 20 °C
- Citric acid, 50%, 40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.