FP 424 Ex S drum pump
FP 424 Ex S-50/45 Z | FEP
Item no. 10-42429507
sealless, for pumping out of IBCs. Made from stainless steel, FEP seal, semi-axial rotor.
Go to product details
- Weight:
- 0 kg
- for use in haz. area:
- yes
- FOOD approval:
- no
- material:
- Stainless steel
- Special feature:
- Made in Germany
Product details
Thanks to the semi-axial rotor (Z version), the pump is particularly well suited to heavier media (density as of 1.3 kg/dm³), with long pressure lines and greater differences in height.
The FP 424 drum pump has no seals in the liquid area and is ideal for pumping a huge range of different low-viscosity and even aggressive media. It is suited to media which flow quickly and don’t harden or crystallise and aren't abrasive. It can be used to empty canisters and hobbocks (immersion length 700 mm). Exclusively from FLUX: The specific design featuring a spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the drum pump and significantly extends the pump’s service life. Radial seals prevent vapours and liquid from entering the coupling area.
The drum pump is made from stainless steel and can also be used in areas subject to explosion hazards. If necessary, the drum pump can also be combined with different motors.
- No seal wear
- Optimum emptying of the inner tube
- Long service life
- Guide bearing and shaft experience little wear
- Long bearing lives
- Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
- Stainless steel version can also be used in areas subject to explosion hazards
| Feature | Value |
|---|---|
| Gewicht | 0 kg |
| 3A version | no |
| connection outlet | External thread G 1 1/4" |
| Outer diameter | 50,00 mm |
| Ex-marking | Ex II 1/2 G Ex h IIB T4…T3 Ga/Gb |
| for use in haz. area | yes |
| FDA approval | no |
| max. flow rate | 160 l/min |
| FOOD approval | no |
| immersion length | 700 mm |
| max. discharge head | 30,0 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FEP |
| material | Stainless steel |
| material shaft | stainless steel |
| mechanical seal | without |
| type impeller | semi-axial impeller 45Z for higher delivery head |
| viscosity max. | 1200 mPas |
| type drum pump | FP 424 |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Acetone, 10%, 20 °C
- Acetone, 10%, 40 °C
- Acetone, 100%, 20 °C
- Acetone, 100%, 40 °C
- Allyl alcohol, 96%, 20 °C
- Allyl alcohol, 96%, 40 °C
- Formic acid, 50%, 20 °C
- Formic acid, 50%, 40 °C
- Formic acid, 85%, 20 °C
- Ammonia solution, 100%, 20 °C
- Ammonia solution, 100%, 40 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium phosphate, 10%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Ammonium sulphate, 10%, 40 °C
- Amyl acetate, 100%, 20 °C
- Amyl acetate, 100%, 40 °C
- Amyl alcohol, 100%, 20 °C
- Amyl alcohol, 100%, 40 °C
- Arsenic acid, 10%, 20-40 °C
- Arsenic acid, 80%, 20-40 °C
- Benzaldehyde, 100%, 20 °C
- Benzaldehyde, 100%, 40 °C
- Benzine, 100%, 20 °C
- Benzine, 100%, 40 °C
- Benzole, 100%, 20 °C
- Benzyl alcohol, 100%, 20 °C
- Benzyl alcohol, 100%, 40 °C
- Benzoic aldehyde, 30%, 20 °C
- Benzoic aldehyde, 100%, 20 °C
- Hydrocyanic acid, 100%, 20 °C
- Hydrocyanic acid, 100%, 40 °C
- Lead acetate, 10%, 20-40 °C
- Borax, 10%, 20-40 °C
- Borax, 100%, 20-40 °C
- Boric acid, 10%, 20-40 °C
- Boric acid, 100%, 20-40 °C
- Brake fluid, 100%, 20 °C
- Butanol, 100%, 20 °C
- Butanol, 100%, 40 °C
- Butanone (MEK), 100%, 20 °C
- Butanone (MEK), 100%, 40 °C
- Butyric acid, 20%, 20 °C
- Butyric acid, 100%, 20 °C
- Butyl acetate, 100%, 20 °C
- Butyl alcohol, 100%, 20 °C
- Butyl alcohol, 100%, 40 °C
- Butylene glycol, 10%, 20-40 °C
- Butylene glycol, 100%, 20 °C
- Butylene glycol, 100%, 40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium chloride, 100%, 20-40 °C
- Calcium hydroxide, 15%, 20 °C
- Calcium hydroxide, 15%, 40 °C
- Calcium nitrate, 50%, 20-40 °C
- Chlorethanol, 100%, 20 °C
- Chlorethanol, 100%, 40 °C
- Chloroform, 100%, 20 °C
- Hydrocyanic acid, 100%, 20 °C
- Hydrogen cyanide, 100%, 20 °C
- Hydrogen cyanide, 100%, 40 °C
- Diesel, 100%, 20 °C
- Diesel, 100%, 40 °C
- Dimethylformamide (DMF), 100%, 20 °C
- Dimethylformamide (DMF), 100%, 40 °C
- Dimethyl phthalate (DMP), 100%, 20-40 °C
- Iron (II) chloride, 10%, 20 °C
- Iron (II) chloride, 50%, 20 °C
- Iron (II) nitrate, 100%, 20-40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Iron (III) sulphate, 50%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Vinegar, 100%, 20-40 °C
- Acetic acid, 10%, 20 °C
- Acetic acid, 10%, 40 °C
- Acetic acid, 25%, 20 °C
- Acetic acid, 25%, 40 °C
- Acetic acid, 50%, 20 °C
- Butanedioic acid, 50%, 20-40 °C
- Ethanol, 100%, 20 °C
- Ethanol, 100%, 40 °C
- Ether, 100%, 20 °C
- Essential oils, 100%, 20 °C
- Essential oils, 100%, 40 °C
- Ethyl acetate, 100%, 20-40 °C
- Ethylbenzene, 100%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Ethyl glycol, 100%, 20-40 °C
- Fatty alcohol, 100%, 20 °C
- Fatty acids, 100%, 20-40 °C
- Formaldehyde, 10%, 20 °C
- Formaldehyde, 10%, 40 °C
- Formaldehyde, 35%, 20 °C
- Formaldehyde, 40%, 20 °C
- Formamide, 100%, 20 °C
- Formamide, 100%, 40 °C
- Fruit juices, 100%, 20-40 °C
- Glucose, 100%, 20-40 °C
- Glycerine, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Glycolic acid, 37%, 20 °C
- Glycolic acid, 70%, 20 °C
- Glycolic acid, 70%, 40 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Urea, 33%, 40 °C
- Heating oil, 100%, 20 °C
- Heating oil, 100%, 40 °C
- Hexanol, 100%, 20 °C
- Hydrazine, 100%, 20 °C
- Isobutyl alcohol, 100%, 20-40 °C
- Isocyanate, 100%, 20 °C
- Isopropanol, 100%, 20-40 °C
- Isopropyl acetate, 100%, 20 °C
- Caustic potash solution, 20%, 20 °C
- Caustic potash solution, 20%, 40 °C
- Caustic potash solution, 30%, 20 °C
- Caustic potash solution, 30%, 40 °C
- Caustic potash solution, 60%, 20-40 °C
- Potassium hydroxide, 20%, 20 °C
- Potassium hydroxide, 20%, 40 °C
- Potassium hydroxide, 30%, 20 °C
- Potassium hydroxide, 30%, 40 °C
- Potassium hydroxide, 60%, 20-40 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Potassium permanganate, 6%, 20-40 °C
- Potassium permanganate, 18%, 20-40 °C
- Lime milk, 15%, 20 °C
- Lime milk, 15%, 40 °C
- Silicic acid, 100%, 20-40 °C
- Copper nitrate, 25%, 20 °C
- Copper nitrate, 25%, 40 °C
- Copper sulphate, 18%, 20 °C
- Copper sulphate, 18%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Methanol, 100%, 20-40 °C
- Methyl acetate, 100%, 20-40 °C
- Methyl glycol, 100%, 20-40 °C
- Milk, 100%, 20 °C
- Lactic acid, 10%, 20-40 °C
- Lactic acid, 90%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium fluoride, 4%, 20 °C
- Sodium fluoride, 4%, 40 °C
- Sodium hydroxide, 10%, 20 °C
- Sodium hydroxide, 10%, 40 °C
- Sodium hydroxide, 30%, 20 °C
- Sodium hydroxide, 30%, 40 °C
- Sodium hydroxide, 50%, 20-40 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Sodium nitrite, 50%, 40 °C
- Caustic soda, 10%, 20 °C
- Caustic soda, 10%, 40 °C
- Caustic soda, 30%, 20 °C
- Caustic soda, 30%, 40 °C
- Caustic soda, 50%, 20-40 °C
- Nitrobenzene, 100%, 20 °C
- Nitrobenzene, 100%, 40 °C
- Nitrotoluene, 100%, 20 °C
- Nitrotoluene, 100%, 40 °C
- Octanoic acid, 100%, 20 °C
- Octanoic acid, 100%, 40 °C
- Oleic acid, 100%, 20 °C
- Oleic acid, 100%, 40 °C
- Oxalic acid, 10%, 20 °C
- Oxalic acid, 10%, 40 °C
- Paraffin oil, 100%, 20 °C
- Paraffin oil, 100%, 40 °C
- Perchloric acid, 20%, 20-40 °C
- Perchloric acid, 50%, 20-40 °C
- Perchloric acid, 70%, 20-40 °C
- Perchloric acid, 100%, 20 °C
- Perchloric acid, 100%, 40 °C
- Peracetic acid, 30%, 20 °C
- Peracetic acid, 100%, 20-40 °C
- Petroleum, 100%, 20 °C
- Petroleum, 100%, 40 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phenol, 90%, 40 °C
- Phosphoric acid, 30%, 20-40 °C
- Phosphoric acid, 50%, 20-40 °C
- Phosphoric acid, 85%, 20-40 °C
- Polyol, 100%, 20 °C
- Propanol, 100%, 20-40 °C
- Propionic acid, 50%, 20-40 °C
- Propionic acid, 100%, 20-40 °C
- Propylene glycol, 100%, 20 °C
- Propylene glycol, 100%, 40 °C
- Castor oil, 100%, 20-40 °C
- Nitric acid, 10%, 20 °C
- Nitric acid, 10%, 40 °C
- Nitric acid, 30%, 40 °C
- Nitric acid, 50%, 20 °C
- Nitric acid, 65%, 20 °C
- Carbon disulphide, 100%, 20 °C
- Carbon disulphide, 100%, 40 °C
- Sulphuric acid, 90%, 20 °C
- Sulphuric acid, 98%, 20 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Styrol, 100%, 20 °C
- Turpentine oil, 100%, 20 °C
- Turpentine oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Toluene, 100%, 20-40 °C
- Transformer oil, 100%, 20 °C
- Transformer oil, 100%, 40 °C
- Glucose solution, 100%, 20-40 °C
- Urine, 100%, 20 °C
- Urine, 100%, 40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
- Hydrogen peroxide, 3%, 20 °C
- Hydrogen peroxide, 3%, 40 °C
- Hydrogen peroxide, 10%, 20 °C
- Hydrogen peroxide, 10%, 40 °C
- Hydrogen peroxide, 20%, 20 °C
- Hydrogen peroxide, 20%, 40 °C
- Hydrogen peroxide, 30%, 20 °C
- Hydrogen peroxide, 30%, 40 °C
- Hydrogen peroxide, 90%, 20 °C
- Hydrogen peroxide, 90%, 40 °C
- Wine vinegar, 100%, 20-40 °C
- Tartaric acid, 100%, 20-40 °C
- Xylene, 100%, 20 °C
- Xylene, 100%, 40 °C
- Zinc chloride, 20%, 20 °C
- Zinc chloride, 20%, 40 °C
- Citric acid, 50%, 20 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.