F 424 PP for AdBlue® drum pump kit
F 424 PP/S-41/35Z
Item no. 10-40744112
EAN: 4260387213172
for filling Adblue® from IBCs.
Go to product details
- Weight:
- 10.1 kg
- motor type:
- FEM 4070
- supply voltage:
- 230-240 V
- material:
- Polypropylene
- for use in haz. area:
- no
- Special feature:
- Made in Germany
- Certificates:
-
Product details
Fully-prepared pump kit comprising F 424 container pump (immersion length 1200 mm), which is free of non-ferrous metals and has no seals near the media, with polypropylene outer tube, FEM 4070 commutator motor, hose line, pump nozzle and compression gland. The pump is non-wearing and the medium cannot be contaminated by lubricants. Openings ensure that the liquid level inside the pump is the same as that in the drum.
- No seal wear
- No bearing wear
- Low-maintenance
- Durable
| Feature | Value |
|---|---|
| Gewicht | 10.1 kg |
| for use in haz. area | no |
| max. flow rate | 50 l/min |
| immersion length | 1200 mm |
| max. discharge head | 18,0 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | FKM |
| material | Polypropylene |
| material shaft | stainless steel |
| mechanical seal | without |
| viscosity max. | 800 mPas |
| cooling | internal ventilated |
| rated output | 0,5 kW |
| protection class | IP 24 |
| speed control | yes |
| supply voltage | 230-240 V |
| motor type | FEM 4070 |
| type drum pump | F 424 |
| cable length | 5,00 m |
| frequency | 50-60 Hz |
| type plug | CEE 7/17-plug |
| undervoltage prot. | yes |
| Ø outlet spout | 19 mm |
| outer diameter | 27,00 mm |
| hose length from | 3,0 m |
| nominal diameter | DN 19 mm |
| certificates | certificates |
| type hose line | pvc hose |
| material seal | FKM |
| material | polypropylene |
| Hand nozzles | technical data |
| Inliner | no |
| material inside | PVC with a wire coil |
| swivelling | yes |
| base part | 41 mm |
| shaft bearing | guide bearing PTFE with fibreglass and graphite |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Silicic acid, 100%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Nitrohydrochloric acid, 100%, 20-40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.