F 430 AL drum pump kit
F 430 AL-41/38
Item no. 10-40710012
EAN: 4260387213103
for pumping petroleum products out of IBCs.
Go to product details
- Weight:
- 6.048 kg
- motor type:
- FEM 4070
- supply voltage:
- 230-240 V
- material:
- Aluminium
- for use in haz. area:
- no
- Special feature:
- Made in Germany
- Certificates:
-
Product details
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1200 mm) with mechanical seal, aluminium outer tube and FEM 4070 commutator motor (500 W). A hose line, pump nozzle and compression gland are also included. The pump can be disassembled into two parts without any tools.
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
| Feature | Value |
|---|---|
| Gewicht | 6.048 kg |
| for use in haz. area | no |
| FDA approval | no |
| max. flow rate | 65 l/min |
| FOOD approval | no |
| immersion length | 1200 mm |
| max. discharge head | 9,5 mWs |
| material impeller | ethylene tetrafluoroethylene |
| material seal | NBR |
| material | Aluminium |
| material shaft | stainless steel |
| mechanical seal | PTFE/carbon, oxide ceramics, S, NBR |
| viscosity max. | 600 mPas |
| cooling | internal ventilated |
| rated output | 0,5 kW |
| protection class | IP 24 |
| speed control | yes |
| supply voltage | 230-240 V |
| motor type | FEM 4070 |
| type drum pump | F 430 |
| cable length | 5,00 m |
| frequency | 50-60 Hz |
| type plug | CEE 7/17-plug |
| undervoltage prot. | yes |
| Suction side | without |
| Ø outlet spout | 25 mm |
| outer diameter | 34,00 mm |
| hose length from | 2,0 m |
| nominal diameter | DN 25 mm |
| certificates | certificates |
| type hose line | mineral oil-hose |
| material seal | NBR |
| material | aluminium |
| Hand nozzles | technical data |
| Inliner | no |
| material inside | NBR black |
| swivelling | yes |
| base part | 41 mm |
| shaft bearing | slide bearing - not in contact with the medium |
| dry installation | no |
| Ex-marking | without |
Media
The media listed below are intended as guidance for common applications. Other media can also be pumped – please contact our customer service for further information.
- Ammonia solution, 100%, 20 °C
- Ammonium nitrate, 10%, 20-40 °C
- Ammonium nitrate, 50%, 20-40 °C
- Ammonium sulphate, 10%, 20 °C
- Boric acid, 10%, 20-40 °C
- Butylene glycol, 10%, 20-40 °C
- Calcium chloride, 10%, 20-40 °C
- Calcium nitrate, 50%, 20-40 °C
- Diesel, 100%, 20 °C
- Diesel, 100%, 40 °C
- Iron (II) sulphate, 20%, 20-40 °C
- Crude oil, 100%, 20-40 °C
- Ethylene glycol, 100%, 20 °C
- Ethylene glycol, 100%, 40 °C
- Formamide, 100%, 20 °C
- Glucose, 100%, 20-40 °C
- Glycol, 100%, 20 °C
- Glycol, 100%, 40 °C
- Urea, 10%, 20-40 °C
- Urea, 33%, 20 °C
- Heating oil, 100%, 20 °C
- Heating oil, 100%, 40 °C
- Isocyanate, 100%, 20 °C
- Potassium nitrate, 10%, 20-40 °C
- Potassium nitrate, 24%, 20-40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Copper nitrate, 25%, 20 °C
- Copper nitrate, 25%, 40 °C
- Linseed oil, 100%, 20 °C
- Linseed oil, 100%, 40 °C
- Magnesium nitrate, 25%, 20-40 °C
- Milk, 100%, 20 °C
- Mineral oils, 100%, 20 °C
- Mineral oils, 100%, 40 °C
- Mineral water, 100%, 20-40 °C
- Sodium acetate, 10%, 20-40 °C
- Bicarbonate of soda, 10%, 20 °C
- Bicarbonate of soda, 10%, 40 °C
- Sodium chloride, 20%, 20 °C
- Sodium chloride, 20%, 40 °C
- Sodium nitrate, 45%, 20 °C
- Sodium nitrate, 45%, 40 °C
- Sodium nitrite, 50%, 20 °C
- Paraffin oil, 100%, 20 °C
- Phenol, 100%, 20 °C
- Phenol, 100%, 40 °C
- Phenol, 50%, 20 °C
- Phenol, 50%, 40 °C
- Phenol, 90%, 20 °C
- Phenol, 90%, 40 °C
- Polyol, 100%, 20 °C
- Propylene glycol, 100%, 20 °C
- Castor oil, 100%, 20-40 °C
- Silicone oil, 100%, 20 °C
- Silicone oil, 100%, 40 °C
- Cooking oil, 100%, 20 °C
- Cooking oil, 100%, 40 °C
- Turpentine oil, 100%, 20 °C
- Turpentine oil, 100%, 40 °C
- Ink, 100%, 20 °C
- Transformer oil, 100%, 20 °C
- Transformer oil, 100%, 40 °C
- Glucose solution, 100%, 20-40 °C
- Water, 100%, 20-40 °C
- Silicate of soda, 20%, 20-40 °C
Datasheet
Declaration of conformity
Drawing
Inquiry form
Manual
Performance curve
Get in touch.
Find documents.
Sales & Advice
Select a pump suitable for the application
We determine the medium, flow rate, viscosity and operating environment.
Requests for quotations
Please send us your requirements
We will assess your requirements and advise you on the most suitable option.
Service & Support
Documents for planning, operation and servicing
Find user manuals, dimension sheets, technical specifications and FAQs.