- Anodizing solution
- Vegetable fibre suspension
- Water-based lacquers
- Alkaline pickling vats
- Industrial effluent
- FLUX en-DE
- Products
- Centrifugal immersion pumps
- FLUX Centrifugal immersion pumps 600
F 620 TR
For horizontal use
For pumping and conveying of large quantities of heavy flammable liquids out of containers, tanks, open containers etc. The pump is used either horizontally mounted onto a base plate or fixed vertically.
Technical data:
- Flow rate: max. 383 l/min1
- Delivery head: max. 12 mwc1
- Viscosity: min. 1 mPas - max. 2500 mPas1
- Diameter pump housing: max. 30 mm2
- Diameter mounting flanges: max. 185 mm2
- Materials outer tube: Stainless steel
- Media / Fluids: Acids, AdBlue®, Alkalis, Fuels
- Seal: mechanical seal
- Container: Tanks > 1000 liters
- 1 dependent on pump model, motor and medium
- 2 dependent on pump model
* AdBlue® is a registered trademark of: Verband der Automobilindustrie e. V. (VDA) *
Product attributes
- For pumping large quantities of heavy flammable liquids
- With console for dry installation
- With threaded connection on inlet and discharge side
- Consisting of an inner and outer tube as well as a drive shaft mounted in the inner tube
- Shaft seal with mechanical sealsin ceramic oxide, O-rings made of FKM
- Depending on the model, available with threaded or flanged connections at suction and discharge side
Benefits
- Can be used horizontally or vertically
- Pumps also fluids containing solids
- Motor can be changed
- Pump is hermetically sealed
- Appropriate motors
Please contact one of our expert advisors or contact person in the office for an optimal motor dimensioning.
- Media examples
- Downloads