Pumpkit MINIFLUX Sanitary

Branch: IndustryBranch: CosmeticsBranch: PharmacyBranch: ChemistryBranch: Food
  • .

The MINIFLUX Sanitary pump sets were designed for pumping from IBCs, bag-in-box IBCs and other containers with an outlet connection at the bottom.  They are an alternative to vertical drum pumps when IBCs cannot be accessed from above or only with great effort. They are also suitable when the natural outlet of the medium via the outlet tap does not provide sufficient delivery pressure, e.g. for rapid filling or pumping into a higher container. Two collector motors are available for the pump sets: the F 458, the robust, encapsulated drum pump motor and the FEM 4070, the compact and lightweight drum pump motor.

The MINIFLUX Sanitary is also designed for use in the hygiene sector. It is suitable for food contact in accordance with EC 1935/2004 and FDA CFR 21 and can be dismantled in seconds without tools.
  • Application areas: FDA  
  • Application areas: Food  

Technical data:

  • Flow rate: max. 60 l/min
  • Delivery head: max. 9 mwc
  • Viscosity: min. 1 mPas - max. 1000 mPas
  • Outer tube diameter: max. 41 mm
  • Materials outer tube: Stainless steel
  • Media / Fluids: Aqueous salt solutions, Highly flammable media, Petroleum products, Solvents
  • Seal: Lip seal (PTFE)
  • Container: 1000 l IBC, Container with floor drain

Product attributes

  • For pumping from IBCs, Bag in Box IBCs and other containers with outlet connection at the bottom
  • Simple connection of the pump to the outlet via clamp connection or union nut
  • Compact design
  • Pump set up dry
  • Little contact with the medium
  • Low total weight of 1.8 kg
  • Does not need to be lifted onto containers
  • IBCs can be emptied down to a residual quantity of less than 1 % (depending on the angle of inclination)

Benefits

  • Can also be used with low ceiling heights
  • Enables pumping directly at the floor outlet, even with IBCs stacked on top of each other
  • Significantly higher flow rate and delivery pressure compared to filling at the outlet tap via the hydrostatic pressure of the medium
  • Less space required overall
  • Pumping against closed valve (e.g. nozzle, flap valve, etc.) possible
  • Conditionally suitable for dry running
  • Particularly suitable for hygienic applications
  • Suitable for food contact in accordance with EC 1935/2004 and FDA CFR 21
  • With lip seal (without mechanical seal)
  • Low dead space
  • Can be dismantled without tools, easy to clean
  • No greased seals - no risk of grease being carried over into the medium