Pump F 426

For mixing and/or pumping

Branch: ChemistryBranch: IndustryBranch: Surface technologyBranch: PetrochemistryBranch: AgricultureBranch: Water treatmentBranch: Paints and lacquers

The F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to "mixing" or "pumping". The pump is easy to dismantle for rapid cleaning. The pump is available in stainless steel and polypropylene. The stainless steel version can also be used in hazardous areas.

 

Technical data:

  • Flow rate: max. 240 1
  • Delivery head: max. 13 mwc1
  • Viscosity: min. 1 mPas - max. 1200 mPas1
  • Outer tube diameter: min. 41 2 - max. 50 2
  • Immersion length: 1000, 1200
  • Materials outer tube: Polypropylene, Stainless steel
  • Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
  • Seal: with mechanical seal
  • Container: 200 l drums, 1000 l IBC
  • 1 dependent on pump model, motor and medium
  • 2 dependent on pump model

Product attributes

  • Mixing and/or  conveying of inhomogeneous liquids
  • Two control levers to easily open/close  the mixing openings
  • Mixing openings allow backflow of medium for mixing back into the container
  • With mechanical seal for inner tube seal
  • Inner tube with metal core at PP
  • Can be combined with various motors as required

Benefits

  • 3 operating modes in one pump:
    - Conveying
    - Conveying with simultaneous mixing
    - Temporarily mixed operation
  • Switching operating modes is possible even while operating
  • Easy to dismantle for cleaning
  • Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on the PP model. It prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges
  • Temporary operation against closed valve (e.g. hand nozzle, ball valve) is possible (until the indicated max. operating temperature has been reached. 
  • Stainless steel version can be used in hazardous area