Go back

VISCOFLUX lite – the new variant in the VISCOFLUX family

The drum emptying system for transferring higher-viscosity materials that are just capable of flowing.

With its drum emptying system VISCOFLUX lite, the Maulbronn-based pump specialist FLUX-GERÄTE GMBH presents another variant of the VISCOFLUX family in addition to VISCOFLUX and VISCOFLUX mobile. VISCOFLUX lite is designed to
transfer higher-viscosity media, which are just capable of flowing, out of ISO drums with lids (with an inside diameter of 571.5 mm), e.g. greases of NLGI class 2 (DIN 51818), adhesives and paint binders.

Quick to install with just a few components.

The components of the VISCOFLUX lite drum emptying system are the FLUX eccentric worm-drive pump, the motor, the pump centring plate and the follower plate with process seal. The system is quick to install, requires little space and can also be used in low working rooms due to its low installation height.

VISCOFLUX lite: Emptying drums to less 1% residue (in drums without inliner).

To continuously and gently transport materials just capable of flowing, FLUX engineers use eccentric worm-drive pumps. In conjunction with a follower plate, a vacuum is created during pumping which pulls the follower plate down automatically. The process seal of the follower plate hermetically seals the material to be conveyed. This provides high process reliability even if the conveyance process is interrupted. Almost no material remains at the drum wall. In this way, users benefit from almost complete drum emptying and efficient use of the material. Like the VISCOFLUX and the VISCOFLUX mobile, the VISCOFLUX lite leaves just less 1% (in drums without inliner) of the material in the drum.

FLUX-GERÄTE GMBH

In 1950 the worldwide’s first electrical drum pump was named FLUX. Meanwhile the undisputed pioneer on the field of drum pump technology also has outstanding expertise and experience in many other areas of pump technology. The comprehensive product portfolio ranges now from various pump types with motors, flow meters and accessories to subsystems for the plant engineering and special system solutions like the drum emptying systems. The internationally acting family company with its 7 subsidiaries and numerous sales partners supplies its products to more than 100 countries worldwide.

Contact and information:

FLUX-GERÄTE GMBH
Talweg 12
D-75433 Maulbronn 
Phone +49 (0)7043 / 101-0
Fax +49 (0)7043 / 101-111
info@flux-pumpen.de
www.flux-pumpen.de

Go back